Smart TV

MAC addresses appear alpha-numeric codes (i.e. a1:b2:c3:45:d9:aa). The addresses will appear in combination of letters and numbers differently for each device. It does not matter if you enter the alphabetical letters in uppercase or lowercase.

 

How to find your MAC addresses for the following devices:

 LG Smart TV:

If the TV doesn't have built-in WiFi, you may need to purchase a 'Dongle' stick from any TV retailer. 

  • Press the TV's 'Home Menu' button
  • At the bottom of the screen, select 'Settings' - press 'Enter'
  • To the left, choose the 'Network' option - press 'Enter'
  • Select the 'Network Connection' option - press 'Enter'
  • 'Start the Connection' **you do not need to choose wired or wireless**
  • Choose the 'BlueRim Network' - press 'Enter'
  • The connection should fail the first time, however the MAC address will be displayed on the right pane of the 'network status window.'
    • Enter the WiFi MAC address to your BlueRim Network account
    • Update your account
    • Power-cycle your TV by turning it off, unplug the cord and turn the TV back on
    • Set up a new connection by following the steps above

Insignia Smart TV:

  • Press 'Enter' to view the TV Menu screen
  • Select the 'Network' option - press 'Enter'
  • Select the 'Wired' option - press 'Enter'
  • The MAC addresses are displayed on the screen
    • Enter the WiFi MAC address to your BlueRim Network account
    • Update your account
    • Power-cycle your TV by turning it off, unplug the cord and turn the TV back on
    • Set up a new connection by following the steps above

 Panasonic Smart TV:

  • From the TV remote, press 'Menu'
  • Navigate to the 'Settings' option - press 'Ok'
  • Choose 'Network Settings' - press 'Ok'
  • Select 'Network Status' - press 'Ok'
  • The MAC address will be displayed
    • Enter the WiFi MAC address to your BlueRim Network account
    • Update your account
    • Power-cycle your TV by turning it off, unplug the cord and turn the TV back on
    • Set up a new connection by following the steps above

 Samsung Smart TV:

  • In the TV 'Menu' screen, select 'Network'
  • Under 'Network' select the option 'Network Settings'
  • Select the connection 'Wireless'
  • Select the BlueRim WiFi signal
  • The WiFi MAC is displayed at the top of the screen
  • If the MAC isn't displayed here, follow the steps below:
    • TV 'Menu'
    • Option 'Network'
    • Option 'Network Status'
  • Once the MAC is located:
    • Enter the WiFi MAC address to your BlueRim Network account
    • Update your account
    • Power-cycle your TV by turning it off, unplug the cord and turn the TV back on
    • Set up a new connection by following the steps above

Sharp Smart TV:

  • Press 'Enter' to bring up the TV Home menu screen
  • Select the 'Network' option - press 'Enter'
  • Choose the 'Wired' option - press 'Enter'
  • The wired and wireless MAC addresses will display on this screen
    • Be sure to choose the appropriate MAC address
  • Once the MAC address is located:
    • Enter the WiFi MAC address to your BlueRim Network account
    • Update your account
    • Power-cycle your TV by turning it off, unplug the cord and turn the TV back on
    • Set up a new connection by following the steps above

Sony Smart TV:

  • Select the 'Home' button
  • Scroll to the 'Settings' option - press 'Enter'
  • Select 'Network Setup' - press 'Enter'
  • Select 'Wired Setup' - press 'Enter'
  • Select 'Network Setup - Status'
  • The MAC address is displayed on the screen
    • Enter the WiFi MAC address to your BlueRim Network account
    • Update your account
    • Power-cycle your TV by turning it off, unplug the cord and turn the TV back on
    • Set up a new connection by following the steps above

Toshiba Smart TV:

  • Preview the TV home page
  • Select 'Settings' - press 'Ok' or 'Enter'
  • Select 'Preferences' - press 'Ok' or 'Enter'
  • Choose the 'Network Setup' - press 'Ok' or 'Enter'
  • Select 'Advanced Network Settings' - press 'Ok' or 'Enter'
  • The MAC address will be displayed for both connection options
    • Enter the WiFi MAC address to your BlueRim Network account
    • Update your account
    • Power-cycle your TV by turning it off, unplug the cord and turn the TV back on
    • Set up a new connection by following the steps above

 Vizio Smart TV:

  • On the remote, press the 'Menu' option
  • Navigate to the 'Network' icon - press 'Ok'
  • Highlight 'Manual Setup' - press 'Ok'
  • The MAC addresses are displayed for the wired/wireless at the bottom of the screen
    • Enter the WiFi MAC address to your BlueRim Network account
    • Update your account
    • Power-cycle your TV by turning it off, unplug the cord and turn the TV back on
    • Set up a new connection by following the steps above

 



Powered by Zendesk